Bronze FitForPower

A great fit option for those riders who know they have “symmetrical” body structure or those on a tight budget.

Cost: $200, includes follow-up session, as needed.  

2nd bike fitting, done back to back, $160. If separate session, $185.

Time: 2 to 2.5 hours, could be a bit more or less.

PrePurchase

 

What To Bring to Your FitForPower Session: 

  1. Bike, rear tire must have plenty of tread (a non-racing compound is suggested).

  2. Bike shoes (IMPORTANT! Cleats must be in proper working/adjustable condition).

  3. Proper cycling attire.

  4. Small towel.

  5. Hydration fluid, energy gel/bar... fuel (Gu Energy products will be provided).

  6. Skin must be smooth and clean (no lotion).

  7. Center of wrist, elbow (at funny bone), and center side of knees should be free of hair.

  8. Ok to bring additional stems (length and angle), saddles, seat posts, cleat wedges and cleat shims.

  9. Optional: Aero helmet, will discuss if it's the proper model for you and why.

  1. Brief rider interview.

  2. Abbreviated body analysis.

  3. Foot, cleat and shoe analysis. Adjustments and recommendations, as necessary.

  4. Warm up session.

  5. Real time data captures w/Retül's 3D dynamic motion capture, left or right sides (which side depends on body analysis).

  6. Review of initial Retül data captures.

A FitForPower bike fit will allow you to generate optimal power and perform with the least amount of strain on the body.

Typical results show an average increase of 8-20% in power output, individual results will vary*

To Schedule an Appointment:

  1. Send us an email or call, with a few day and time options that work best for you.

  2. We do our best to accommodate based upon your schedule.

  3. The Lab is open weekdays, weekends... just about any time of day.

Session Includes: 

  1. Adjustments and equipment recommendations.

  2. Zin of bike adjustments. (After only)

  3. Retül Fit reports.

  4. Bike and Rider fit definition.

  5. Data sheets and reports emailed within two days after completing of fit session.

  6. Guarantee: Follow-up session within the first three weeks of the initial fitting, as necessary.


option: Zin of bIke before adjustments w/report $15

Invest In yourself first!

PedPowerPerform Lab | San Diego, CA 92109 | (+1) 858-270-1605 | Contact us

© PedPowerPerform Lab 2008-2017